A flush floor vent made from your own LVP or LVT costs $135 to $190 at Vents.com, depending on size, and a matching egg-crate cold air return costs $363 or $391. Most homes need a handful of 4-inch vents, so the vents usually run from a few hundred dollars for one room to around $2,000 for a main floor. Hardwood vents are priced by quote.
Prices by size
Vents are priced by the size of the duct opening, not the outside of the old register. These are the current prices for vents and returns made from LVP or LVT flooring.
Hardwood vents are built to order for each floor, so they're quoted rather than listed. Tell us the brand, thickness, species and sizes on the hardwood quote page. Not sure of your sizes? The floor vent size guide shows how to measure.
What a typical project costs
Here's how the math works for a few common setups. These are examples to show the method, not a quote. Your total depends on how many openings you have and their sizes.
- One bedroom$270Two 4x10 vents at $135 each.
- Living room with a return$796Three 4x12 vents at $135, plus one 8x30 return at $391.
- Main floor$1,823Eight 4x12 vents at $135, two 6x12 vents at $190, and one 6x30 return at $363.
Returns make the biggest difference to the total. One large return costs about as much as three small supply vents, so it's worth knowing how many you have before you set a budget.
What drives the price
Width of the opening
2- and 4-inch vents up to 12 inches long are all $135. The price steps up at 4x14 and again for 6-inch widths, because the vent and its frame use more material.
Supply vent or return
A cold air return is far larger than a supply vent, so it costs more. Size the return by its opening, just like a supply vent.
Your flooring type
LVP and LVT vents have set prices by size. Hardwood varies with species, thickness and finish, so it's quoted per project.
How many openings you have
Cost scales with the count. Walk the room and count every supply and return before you budget, including the ones under furniture.
Sending your flooring
Each vent is built from a piece of your own floor, so plan to send us flooring with the order. Set aside some leftover pieces from your install for it.
Installation
On a new floor, the installer cuts the boards to the vent frame as they go. Cutting a new opening in a finished floor takes longer, so expect more labor time.
How it compares with other options
A matching vent isn't the cheapest way to cover a duct. Here's how the common choices stack up for a single 4x10 opening. Prices for other options are public ranges seen on retailer sites in October 2026 and change often.
Standard steel register
- Typical cost
- About $7 to $18 for a 4x10.
- Look
- A metal grille that sits on top of the floor in white, brown or black.
- Best for
- Tight budgets, utility rooms, and floors where the vent doesn't need to blend in.
Unfinished wood flush mount
- Typical cost
- About $18 to $28 for a 4x10 in oak, plus stain and finish.
- Look
- Solid wood you stain to get close to the floor.
- Best for
- Site-finished solid hardwood floors, where it can be finished with the floor.
DIY tray or insert kit
- Typical cost
- About $20 to $200 per vent.
- Look
- Your own flooring glued into a tray, so the match depends on your cuts.
- Best for
- Handy owners who have spare flooring and time.
Vents.com, made from your floor
- Typical cost
- $135 to $190 per LVP or LVT vent, $363 to $391 per return. Hardwood by quote.
- Look
- Your actual floor, set flush in a frame, with no lip on top of the floor.
- Best for
- New LVP, LVT or hardwood floors where you want the vents to disappear.
The gap is real: a matching vent costs several times what a steel register does. What you get for it is a vent that's the same material as the floor, sits level with it, and doesn't catch a sock or a vacuum. In an open room with a new floor, that's often where people notice the difference most. For a closer look at each option, see 4 ways to get floor vents that match your floor.
How to budget for your vents
- Count every openingNote each supply vent and return in the rooms getting new flooring.
- Measure the duct openingsLift each register and measure the hole, not the old cover. That's the size you order.
- Add it up by sizeGroup the openings by size and multiply by the price for each size.
- Decide on the returnsReturns are the biggest single line. Some people match the returns in the main rooms and keep standard grilles in hallways or closets.
- Order before install dayGet the vents in the room before the crew reaches the first opening, so the boards are cut to the frames as the floor goes in.
If you're still pricing the floor itself, it helps to budget the floor and the vents together. Our partner store Floor City carries vinyl plank flooring, and a piece of that same flooring is what we build your vents from. Questions about a specific project are welcome through our contact page.
- Made from your own floor
- Sits flush, no lip
- 9 vent sizes
- 8 return sizes
- LVP, LVT and hardwood
Frequently asked questions
How much does a custom floor vent cost?
At Vents.com, a flush vent made from your own LVP or LVT is $135 for 2x10, 2x12, 2x14, 4x10 and 4x12 sizes, $175 for 4x14, $185 for 6x10, and $190 for 6x12 and 6x14.
How much does a matching cold air return cost?
Egg-crate cold air returns made from your LVP or LVT are $363 for 6-inch-wide sizes (6x20 to 6x36) and $391 for 8-inch-wide sizes (8x20 to 8x36).
How much do hardwood matching vents cost?
Hardwood vents are priced by quote, since species, thickness and finish all change the build. Send your details through the hardwood quote page.
Why do matching vents cost more than metal registers?
A steel register is a mass-produced stamped part. A matching vent is built from your own flooring on a frame that sits flush with the floor, one order at a time.
Is a DIY vent kit cheaper?
Usually, yes. Public kit prices run from about $20 to around $200 per vent. You do the cutting and gluing, and the result depends on how clean your cuts are.
Can I mix matching vents and standard registers?
Yes. Many homeowners match the vents in open, visible rooms and use standard registers in closets, laundry rooms or hallways.
Related guides
- Floor vent sizes and how to measureA size chart, how to measure the duct opening, and the sizes we build most.
- 4 ways to get vents that match your floorDIY trays, vents made from your floor, printed vents and installers compared.
- Custom vs standard floor ventsHow a flush custom vent compares with a standard drop-in register.
- Matching cold air return coversEgg-crate returns made from your LVP, LVT or hardwood, in all 8 sizes.
- When to order vents before your installWhen to measure, set a plank aside and order so vents arrive on time.
- Do flush vents restrict heat and AC?What open area means, and how to tell if a vent is really holding back air.