Three steps to a matched vent
- Order onlineChoose the vent sizes, plus a return if you need one.
- Mail one plankWe build from your real Raskin Gencore flooring.
- Get a matched ventYour plank on a metal backer, ready to drop in.
Which Raskin Gencore floors we cover
Gencore Originals
5 mm incl. 1 mm backing total thickness
PlankGencore Originals pairs a 4 mm SPC core with a 1 mm attached backing.
Some thicknesses come from retailer listings rather than a Raskin Gencore spec sheet.
Sold through Raskin dealers. Parent company: Raskin.
What to send with your order
Raskin cartons list the collection and color. Put that on your order notes and include one spare plank.
Strength
- Metal backer under your flooring
- Tested to 1,200 lbs on a 2-inch puck
- Sits flush, no raised edge
Raskin Gencore vent FAQ
Where do I find my Raskin Gencore color or style?
Raskin cartons list the collection and color.
Can you also make a matching cold air return for Raskin Gencore?
Yes. Returns come in 6x20, 6x24, 6x30, 6x36, 8x20, 8x24, 8x30 and 8x36 inches, built from your flooring the same way.
What vent sizes can you build from Raskin Gencore flooring?
2x10, 2x12, 2x14, 4x10, 4x12, 4x14, 6x10, 6x12 and 6x14 inches.
Is Raskin Gencore planks strong enough for a floor vent?
The vent face is mounted on a metal backer, and our vents are tested to 1,200 lbs on a 2-inch puck.
Which Raskin Gencore lines can you make vents from?
Any Raskin Gencore click floor you send us. The lines listed on this page (Gencore Originals) are the 5 mm-and-thicker click products we have specs for.
Do I need to know the thickness of my Raskin Gencore floor?
It helps. Gencore Originals is 5 mm incl. 1 mm backing. If you are not sure, send the spare piece and we will check it.
Guides for Raskin Gencore floors
- Flush vents on floating LVP floorsHow a flush vent fits around the duct without pinning a floating floor.
- When to order vents before your installWhen to measure, set a plank aside and order so vents arrive on time.
- What custom floor vents costPrices by size for LVP vents and returns, and what drives the cost.

